This set and forget inline dimmer should be in every electrician’s van!  Worried that the LED strip light you are about to install is too bright?  This inexpensive device will save you time and money by allowing you to set the desired light level on the job.

This dimmer is wired between the output of the LED driver and the input of LED strip light.  It can operate up to 5m of standard 12V 14.4W/m or 10m of standard 24V 14.4W/m LED strip light.

By using the onboard DIP switches you can set the following features:

• The light levels can be set at 10%, 20%, 30%, 40%, 50%, 60%, 80% and 100% of the maximum LED strip’s brightness.
• Soft start (ramp up from off) 0 sec, 1 sec, 2 sec and 4 sec.
• Output PWM frequency 1KHz or 8KHz

Features:

• 12V (72W) / 24V (144W)  6A
• Can be used in conjunction with other dimmers or dimmable drivers.
• Overload protection
• Overheat protection